Home Discussion Forums Papers Authors
 January 18, 2021, 11:19 pm UTC
 September 13, 2008 10:32AM Registered: 15 years ago Posts: 3,316
Hello Clive,

In my post previous to this one I wrote, ‘If you believe I am wrong about this diagram, then “put your money where your mouth is”, as the saying goes, and post a full explanation of exactly how it is evidence for the AEs using degrees.’

Reading through this thread I noticed the following post from you to Don:
Quote:
Don] Hi Clive already have it as 123.62 cubits
123.62 + 241 = 364.62
If we use 125.22 + 241 = 366.22
Not quite the year ... should it be?

Clive] If you go back to the other postings you will see G3 over layed on G1. The height of G3 is 124.7...add to the 241 and you have 365+.
Unfortunately the builders had more advanced math in the works and it overruled the simplistic 365 day count. Besides...you have been given Mercury's and Venus' orbit already. You must look from the opposite direction for Earth and Mars.

The deform in the shaft is located at course #83 and #84.
What is the circumference of a circle if the angle shown represented the diameter of the circle? At what height from the base does the shaft protrude?
Best.
Clive
Unquote.

At last, an explanation of your opening diagram!
Wonderful.
Unfortunately, there is one thing wrong with it; it is unmitigated codswallop!

Usually, I take the trouble to at least try explaining to a fellow poster why I disagree with their hypothesis.
However, given your propensity for telling posters who ask you for an explanation of your diagrams, etc. to work it out for themselves, I’m sure you won’t mind my telling you to work out for yourself the long list of things that are wrong with your hypotheses.

MJ
Subject Author Posted

#### Uncovering another pi value in G1 using degrees

Clive September 10, 2008 09:15AM

#### Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 09:55AM

#### Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:02AM

#### Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 10:07AM

#### Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:32AM

#### Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 12:26PM

#### Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 02:21PM

#### Re: Uncovering another pi value in G1 using degrees

Dave L September 11, 2008 02:00AM

#### Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 11, 2008 09:17AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:56PM

#### Re: Uncovering another pi value in G1 using degrees

Jon_B September 10, 2008 01:00PM

#### Oops

Jon_B September 10, 2008 02:29PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 04:41PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 07:23PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:09PM

#### **Moderation note**

Hermione September 11, 2008 09:12AM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 11, 2008 01:53PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 11:12AM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 02:18PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 05:17PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 07:55PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 10:32AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:27PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:04PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 10:28PM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:18AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 11:58AM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 08:54PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:24AM

Hermione September 15, 2008 09:59AM

#### **Moderation note**

Hermione September 15, 2008 07:48AM

#### Re: Uncovering another pi value in G1 using degrees

Don Barone September 12, 2008 09:07PM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 08:23AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:36PM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 03:15PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:39PM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:22PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 05:40PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 07:12PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:26AM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 15, 2008 04:03AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:57AM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 02:40PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 03:46PM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:16PM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:24PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:56PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:37PM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:07PM

#### Re: Uncovering another pi value in G1 using degrees

Kanga September 16, 2008 10:03AM

#### Re: Uncovering another pi value in G1 using degrees

Don Barone September 16, 2008 06:37PM

#### Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 17, 2008 12:17AM

#### Re: Uncovering another pi value in G1 using degrees

Chris Tedder September 17, 2008 07:55AM

#### So-called 45* line at Giza

Kanga September 17, 2008 08:39AM

#### Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 12:20PM

#### Re: So-called 45* line at Giza

Jon_B September 18, 2008 02:18PM

#### Re: So-called 45* line at Giza

Don Barone September 18, 2008 02:35PM

#### Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 05:29PM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 17, 2008 03:39AM

#### Re: correction to post

MJ Thomas September 11, 2008 11:01AM

#### Re: correction to post

Don Barone September 11, 2008 11:50AM

#### Re: correction to post

MJ Thomas September 11, 2008 02:16PM

#### Re: correction to post

Don Barone September 11, 2008 02:33PM

#### Re: correction to post

MJ Thomas September 11, 2008 05:39PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:49PM

#### Re: Uncovering another pi value in G1 using degrees

Jon_B September 12, 2008 10:04AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 10:56AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:39PM

#### Re: Uncovering another pi value in G1 using degrees

Jon_B September 13, 2008 03:51PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:41PM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:20AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 12:18PM

#### Re: Uncovering another pi value in G1 using degrees

Jon_B September 14, 2008 03:59AM

#### Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:45AM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 09:05PM

#### Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:25AM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 03:47PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:58PM

#### Re: Uncovering another pi value in G1 using degrees

Don Barone September 10, 2008 10:00PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 11:51PM

#### Re: Uncovering another pi value in G1 using degrees

Don Barone September 11, 2008 12:00AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 11, 2008 12:56AM

#### Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 01:59AM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 02:00PM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:29PM

#### Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:34PM

#### Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:44PM

#### Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:49PM

#### Re: Uncovering another pi value in G1 using degrees

mlpeel September 13, 2008 05:56PM

#### Re: Uncovering another pi value in G1 using degrees

Don Barone September 13, 2008 07:34PM

#### Re: Uncovering another pi value in G1 using degrees

mlpeel September 14, 2008 12:11AM

#### And now for something completely different Clive: Drafting the pyramids

Don Barone September 13, 2008 09:23PM

#### Re: And now for something completely different Clive: Drafting the pyramids

Don Barone September 14, 2008 12:48AM

Don Barone September 14, 2008 08:23AM

#### Re: And now for something completely different Clive: Drafting the pyramids

Clive September 14, 2008 01:09PM

#### Re: And now for something completely different Clive: Drafting the pyramids

lobo-hotei September 14, 2008 04:05PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 12:01PM

#### Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 01:07PM

#### Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 03:08PM

#### Pi for Chris, MJ, Clive et al

Don Barone September 18, 2008 06:32PM

#### An addendum as food for thought

Don Barone September 18, 2008 06:50PM

#### Re: Pi for Chris, MJ, Clive et al

Khazar-khum September 19, 2008 11:34PM

Sorry, only registered users may post in this forum.