Home of the The Hall of Ma'at on the Internet
Home
Discussion Forums
Papers
Authors

April 5, 2020, 11:39 pm UTC    
September 13, 2008 01:27PM
MJ Thomas Wrote:
-------------------------------------------------------
> Okay, so your post is not concerned with the
> apexes of Relieving Chambers and the Queen’s
> Chamber, nor is it concerned with the courses of
> the superstructure.
> Well, I been busy working on your diagram and I
> conclude that it is in fact totally meaningless.

MJ:
I know you do because you cannot see the relevance of the post...you forgot something.

> Projecting a line at 31.812 degrees from the south
> base as you have done will naturally produce the
> 62.831 degrees in your diagram, and vice versa.

Good work....finally...!

Now think of these two statements...first...you can't see...second you tell me where a line would automatically fall.
what is it going to be?
Can you see (mathematically ) or not...?

You wanted evidence of a 360 degrees circle used at Giza...right?
I asked four times, how many examples do you require and you refused to answer...right?
Now that I give you two you ignore them completely and introduce features that are irrelevant to the post.

Well...if you "can" see what "automatically" transpired then you would realize that I used a mathematical decimal number for pi and multiplied it by 20, converted it into an angular measure using a 360 degrees system.
Then I took the same number pi and divided into 100 and applied it to the same 360 degrees system...that's the number pi multiplied and divided..."and"...and 360 degrees circle.
The result is they intersect at the center line of the Kc.

Now I want you to chose any other number but 360 for the division of the circle and see where the two lines intersect. I guarantee that it is nowhere near the KC center line.
IOW....you can only conclude from this illustration that the ancients used a 360 degrees system and knew pi to at least 3 decimal places. If you elect to neglect this simple evidence then eventually, in time, you will become the only individual to do so.

> But this only works if you put the mid-line of the
> King’s Chamber 21 royal cubits south of the face
> of the Great Step, which itself is actually within
> an estimated 3” of the East-West axis of the
> Pyramid’s base.
> But why is the King’s Chamber 21 royal cubits
> south of the face of the Great Step?
> Why isn’t it centred over the E-W axis of the
> Pyramid’s base as is the Queen’s Chamber?

As you claim...> It is where Khufu or his architect wanted it to be...!
Why should I tell you? You don't read what I post and consistently drift off into your own world.

> I wrote, ‘Then please kindly explain to me what
> exactly it is that you are posting here.
> Thank you.

You above...please...give me strength...!

> You write, ‘There is an Upper chamber that is
> located central to the pyramid...is there a reason
> why it is located central of the structure?

> Yes, it is where Khufu or his architect wanted it to be.

Now you know why you lack understanding of the Giza site...everything is there because of the architect...right?
That puts you right back to the beginning when you first studied this site.
How many years...30?
What a waste.

Best.
Clive
Subject Author Posted

Uncovering another pi value in G1 using degrees

Clive September 10, 2008 09:15AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 09:55AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:02AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 10:07AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:32AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 12:26PM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 02:21PM

Re: Uncovering another pi value in G1 using degrees

Dave L September 11, 2008 02:00AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 11, 2008 09:17AM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:56PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 10, 2008 01:00PM

Oops

Jon_B September 10, 2008 02:29PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 04:41PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 07:23PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:09PM

**Moderation note**

Hermione September 11, 2008 09:12AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 11, 2008 01:53PM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 11:12AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 02:18PM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 05:17PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 07:55PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 10:32AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:27PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:04PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 10:28PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:18AM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 11:58AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 08:54PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:24AM

**Sub-thread closed**

Hermione September 15, 2008 09:59AM

**Moderation note**

Hermione September 15, 2008 07:48AM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 12, 2008 09:07PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 08:23AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:36PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 03:15PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:39PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:22PM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 05:40PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 07:12PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:26AM

Re: Uncovering another pi value in G1 using degrees

Ronald September 15, 2008 04:03AM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:57AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 02:40PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 03:46PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:16PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:24PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:56PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:37PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:07PM

Re: Uncovering another pi value in G1 using degrees

Kanga September 16, 2008 10:03AM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 16, 2008 06:37PM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 17, 2008 12:17AM

Re: Uncovering another pi value in G1 using degrees

Chris Tedder September 17, 2008 07:55AM

So-called 45* line at Giza

Kanga September 17, 2008 08:39AM

Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 12:20PM

Re: So-called 45* line at Giza

Jon_B September 18, 2008 02:18PM

Re: So-called 45* line at Giza

Don Barone September 18, 2008 02:35PM

Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 05:29PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 17, 2008 03:39AM

Re: correction to post

MJ Thomas September 11, 2008 11:01AM

Re: correction to post

Don Barone September 11, 2008 11:50AM

Re: correction to post

MJ Thomas September 11, 2008 02:16PM

Re: correction to post

Don Barone September 11, 2008 02:33PM

Re: correction to post

MJ Thomas September 11, 2008 05:39PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:49PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 12, 2008 10:04AM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 10:56AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:39PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 13, 2008 03:51PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:41PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:20AM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 12:18PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 14, 2008 03:59AM

Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:45AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 09:05PM

Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:25AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 03:47PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:58PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 10, 2008 10:00PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 11:51PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 11, 2008 12:00AM

Re: Uncovering another pi value in G1 using degrees

Clive September 11, 2008 12:56AM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 01:59AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 02:00PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:29PM

Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:34PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:44PM

Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:49PM

Re: Uncovering another pi value in G1 using degrees

mlpeel September 13, 2008 05:56PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 13, 2008 07:34PM

Re: Uncovering another pi value in G1 using degrees

mlpeel September 14, 2008 12:11AM

And now for something completely different Clive: Drafting the pyramids

Don Barone September 13, 2008 09:23PM

Re: And now for something completely different Clive: Drafting the pyramids

Don Barone September 14, 2008 12:48AM

small addendum ....

Don Barone September 14, 2008 08:23AM

Re: And now for something completely different Clive: Drafting the pyramids

Clive September 14, 2008 01:09PM

Re: And now for something completely different Clive: Drafting the pyramids

lobo-hotei September 14, 2008 04:05PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 12:01PM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 01:07PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 03:08PM

Pi for Chris, MJ, Clive et al

Don Barone September 18, 2008 06:32PM

An addendum as food for thought

Don Barone September 18, 2008 06:50PM

Re: Pi for Chris, MJ, Clive et al

Khazar-khum September 19, 2008 11:34PM



Sorry, only registered users may post in this forum.

Click here to login