Home of the The Hall of Ma'at on the Internet
Home
Discussion Forums
Papers
Authors

September 28, 2020, 5:17 am UTC    
September 15, 2008 09:57AM
Ronald Wrote:
-------------------------------------------------------

> You don’t even seem to have the common sense to
> understand that, since Khufu’s pyramid was sealed
> off, there was plenty of time – approx. 4550 years
> – for grave robbers to enter the pyramid and steal
> everything on their path, as they did,


Ronald:
There has been more grave robbing at Giza in the past 200 years than there was since the construction of these monuments.
Since many have not been opened since antiquity (some still remain unopened) please explain why...do you think the "robbers" forgot how to break into them? All they had to do was climb down the chimneys to gain entry.
Research and discover for yourself what was being left with the deceased for the afterlife. I think you have perceptions of grandeur, something like Tut's find. Brace yourself for the bad news...it just didn't happen....jugs, jars, dishes and dust.

> and has happened to almost all other pyramids and almost
> all other tombs in Ancient Egypt.

When and by who?
Do you realize that if archeologists had not offered $$$ for artifacts then most of these tombs would still be intact. Unfortunately the practice continues as I type this message to you.
You mention of religion....this site was off limits to all...you didn't fool around with the dead...it was cursed soil for those who trespassed.

> You wrote ; ‘If you were king would you want to
> leave a passage leading directly to your place of
> rest’.
>
> You place this purposedly into the wrong context.
> The Grand Gallery had a symbolic meaning,

For crying out Ronald...
Please explain what the "symbolic meaning" is...I hope it's a better tale than any I have heard to-date.
I simply don't get it...how the same rhetoric is used repetitively to "squeeze" theories into a conversation.

> And, on the
> contrary, the AE saved no efforts to block the KC
> off.

That's the whole point Ronald...
Why hide the point of entry into two pyramids but not the third?
The small pyramid directs us to where the entrances of the two large pyramids were located...near the base on the north side. Without the third pyramid base design the entrances would have never been discovered.
Ask yourself why they showed us where the entrance to G3 is located?

As for the kings buried within...if they were then I will "guarantee" we will never discover their place of rest.

> The construction of the Grand Gallery must
> also have been necessary to be able to construct
> certain parts of the monument, maybe even the KC
> itself.

Let's see...
I read the words "must" and "maybe"

It reads like most "professional" statements of theories relating to the Giza pyramids and kings.

Best.
Clive
Subject Author Posted

Uncovering another pi value in G1 using degrees

Clive September 10, 2008 09:15AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 09:55AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:02AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 10:07AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 10:32AM

Re: Uncovering another pi value in G1 using degrees

Dave L September 10, 2008 12:26PM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 10, 2008 02:21PM

Re: Uncovering another pi value in G1 using degrees

Dave L September 11, 2008 02:00AM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 11, 2008 09:17AM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:56PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 10, 2008 01:00PM

Oops

Jon_B September 10, 2008 02:29PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 04:41PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 07:23PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:09PM

**Moderation note**

Hermione September 11, 2008 09:12AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 11, 2008 01:53PM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 11:12AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 02:18PM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 05:17PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 12, 2008 07:55PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 10:32AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:27PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:04PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 10:28PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:18AM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 11:58AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 08:54PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:24AM

**Sub-thread closed**

Hermione September 15, 2008 09:59AM

**Moderation note**

Hermione September 15, 2008 07:48AM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 12, 2008 09:07PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 08:23AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:36PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 03:15PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:39PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:22PM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 05:40PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 07:12PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:26AM

Re: Uncovering another pi value in G1 using degrees

Ronald September 15, 2008 04:03AM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 09:57AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 02:40PM

Re: Uncovering another pi value in G1 using degrees

Clive September 15, 2008 03:46PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:16PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 15, 2008 05:24PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 13, 2008 05:56PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:37PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 14, 2008 04:07PM

Re: Uncovering another pi value in G1 using degrees

Kanga September 16, 2008 10:03AM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 16, 2008 06:37PM

Re: Uncovering another pi value in G1 using degrees

lobo-hotei September 17, 2008 12:17AM

Re: Uncovering another pi value in G1 using degrees

Chris Tedder September 17, 2008 07:55AM

So-called 45* line at Giza

Kanga September 17, 2008 08:39AM

Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 12:20PM

Re: So-called 45* line at Giza

Jon_B September 18, 2008 02:18PM

Re: So-called 45* line at Giza

Don Barone September 18, 2008 02:35PM

Re: So-called 45* line at Giza

Chris Tedder September 18, 2008 05:29PM

Re: Uncovering another pi value in G1 using degrees

Ronald September 17, 2008 03:39AM

Re: correction to post

MJ Thomas September 11, 2008 11:01AM

Re: correction to post

Don Barone September 11, 2008 11:50AM

Re: correction to post

MJ Thomas September 11, 2008 02:16PM

Re: correction to post

Don Barone September 11, 2008 02:33PM

Re: correction to post

MJ Thomas September 11, 2008 05:39PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:49PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 12, 2008 10:04AM

Re: Uncovering another pi value in G1 using degrees

Clive September 12, 2008 10:56AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 01:39PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 13, 2008 03:51PM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 09:41PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 01:20AM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 12:18PM

Re: Uncovering another pi value in G1 using degrees

Jon_B September 14, 2008 03:59AM

Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:45AM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 14, 2008 09:05PM

Re: Uncovering another pi value in G1 using degrees

Kanga September 14, 2008 09:25AM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 10, 2008 03:47PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 08:58PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 10, 2008 10:00PM

Re: Uncovering another pi value in G1 using degrees

Clive September 10, 2008 11:51PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 11, 2008 12:00AM

Re: Uncovering another pi value in G1 using degrees

Clive September 11, 2008 12:56AM

Re: Uncovering another pi value in G1 using degrees

Ronald September 13, 2008 01:59AM

Re: Uncovering another pi value in G1 using degrees

Clive September 13, 2008 02:00PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:29PM

Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:34PM

Re: Uncovering another pi value in G1 using degrees

Khazar-khum September 13, 2008 03:44PM

Re: Uncovering another pi value in G1 using degrees

Tommi Huhtamaki September 13, 2008 03:49PM

Re: Uncovering another pi value in G1 using degrees

mlpeel September 13, 2008 05:56PM

Re: Uncovering another pi value in G1 using degrees

Don Barone September 13, 2008 07:34PM

Re: Uncovering another pi value in G1 using degrees

mlpeel September 14, 2008 12:11AM

And now for something completely different Clive: Drafting the pyramids

Don Barone September 13, 2008 09:23PM

Re: And now for something completely different Clive: Drafting the pyramids

Don Barone September 14, 2008 12:48AM

small addendum ....

Don Barone September 14, 2008 08:23AM

Re: And now for something completely different Clive: Drafting the pyramids

Clive September 14, 2008 01:09PM

Re: And now for something completely different Clive: Drafting the pyramids

lobo-hotei September 14, 2008 04:05PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 12:01PM

Re: Uncovering another pi value in G1 using degrees

Clive September 14, 2008 01:07PM

Re: Uncovering another pi value in G1 using degrees

MJ Thomas September 14, 2008 03:08PM

Pi for Chris, MJ, Clive et al

Don Barone September 18, 2008 06:32PM

An addendum as food for thought

Don Barone September 18, 2008 06:50PM

Re: Pi for Chris, MJ, Clive et al

Khazar-khum September 19, 2008 11:34PM



Sorry, only registered users may post in this forum.

Click here to login